Autowatch Ghost 2
Autowatch Ghost 2, an innovative immobiliser that protects against key-long stealing as well as relay theft, cloning and. It is a discrete device that operates in complete silence. A unique PIN code must be entered using the buttons on the steering wheel and centre console.
It is totally undetectable by thieves using diagnostic tools because it emits radio signals. It's also a breeze as it does not require an additional fob or tracker.
Cost of installation
Ghost immobilisers, also known as a ghost alarm, is a discrete device that is integrated into the CAN data network of a vehicle. It does not require additional LED indicators or fobs. It's virtually inaccessible to thieves, and it works on a completely different basis from regular car alarms. It stops the engine from starting unless the specific sequence of buttons are activated by the owner of the vehicle. This will ensure that only the owner of the vehicle can drive the car and reduce the chances of it being stolen.
Ghost immobilisers are less expensive than traditional devices and can be installed within your vehicle in only a few hours with qualified technicians. They can also be transferred between vehicles and are a cost-effective option to increase the security of your vehicle. You can use a ghost-immobiliser along with a tracking system to provide an additional layer of security to your vehicle.
Modern vehicles are easy targets for thieves with sophisticated tools to copy the remote to unlock the car, and then steal it. This is why it is essential to secure your vehicle with an immobiliser that is ghostly. It will prevent the vehicle from moving until you press a particular sequence of buttons. This will give you peace of mind in the event that you're letting your car to valet parking, or hiring an employee.
ghost 2 immobiliser cost is a innovative car security system that protects against modern theft methods like key cloning. This small electrical gadget connects to your vehicle's CAN system and disables the engine when you enter a PIN number. It is a discreet device that is not affected by signal jamming or device spoofing. It also has the added benefit of alerts for calls to your mobile phone if someone tries to interfere with your vehicle.
The Autowatch Ghost 2 is available for PS499 (including VAT) and can be installed in a couple of hours by our highly-skilled TASSA (Autowatch), DBS-certified installers. It is a low-maintenance device that can be easily moved from vehicle to vehicle. It is compatible with the majority of CAN-bus systems.
Cost of replacement keys
The Autowatch Ghost is a sophisticated piece of technology that offers the most advanced security against key cloning hacking, vehicle theft and key-cloning. It's designed to work without the requirement of additional key fobs or LED indicators and is compatible with all modern vehicles. Our qualified technicians can install it in the majority of vans and cars within just a couple of hours. The system can be utilized in conjunction with car trackers to provide an even higher level of security.
The system is connected to your vehicle's CAN data network, which makes it unnoticeable to thieves. This means that it won't trigger any diagnostic lights because there are no radio signals. The criminal won't be able to access the OBD port of your vehicle as it is directly linked to the ECU. This will stop the thief from acquiring new key fobs or replacing the ECU which would normally enable them to start the vehicle.
The ghost immobilise r also completely sealed and concealed within the vehicle harness. This makes it almost impossible for thieves to locate. The system uses the buttons already present on the steering wheel and dash to generate a unique PIN code sequence that needs to be entered before the vehicle can begin. Monty's can also programme a Service/Valet mode that allows you to temporarily start the car without entering the PIN number. This is helpful when you're transferring your vehicle over to a mechanic or valet parking service.
If the PIN code sequence has not been entered then the CAN Ghost will stop the vehicle from moving, or stall the engine and gearbox - according to your specific vehicle requirements. It can be connected to a vehicle tracker so you can see the position of your vehicle's location on a map from any device that is connected to the internet.
The system is extremely simple to install and is able to be moved from vehicle to which makes it a great alternative for classic and sports cars. It doesn't require batteries or power cables because it is directly wired into the CAN network of your vehicle. It is virtually undetectable and is installed in a matter of hours by one of our TASSA certified, DBS security checked and certified technicians.
Cost of a replacement vehicle
Autowatch Ghost immobiliser gives advanced protection against key hacking and copying. It works by directly integrating with the vehicle's ECU creating a wall that's nearly impossible to break without the correct PIN code. Additionally it is TASSA certified and insurance-approved and is a top option for those looking to enhance the security of their car. This system can help you save money on car insurance as most insurers give discounts to cars that use this system.
The Ghost system is unnoticeable to thieves, and it operates without radio signals. It connects to the vehicle's CAN data network and requires a unique pin code to start the engine. It also prevents hackers accessing the system through diagnostic scans or altering the car's port OBD. The device also uses an algorithm that can identify and blocks cloned keys.
While it is possible to install Ghost immobilisers yourself, the process can be dangerous. It should only be done by a qualified professional. A wrong installation can damage the wiring in your car and render the device ineffective. DIY installations may also invalidate the warranty on your vehicle and device.
The majority of Ghost users report high levels of satisfaction with the device. They appreciate the security and peace of mind security it brings. Furthermore it is simple to use and discrete in appearance. Many are satisfied with the fact that it can protect their vehicle from theft even in the event that they lose their keys.
Some customers have reported problems with the device’s stop/start function. This can be caused by an improper configuration, or a problem independent of the Ghost immobiliser. However, these issues are rare and can be resolved by contacting the firm that installed the Ghost.
It is recommended to hire an experienced Ghost installer, because when the device is damaged by a skilled hacker it could be extremely expensive to repair or replace. The best way to prevent this is to ensure that the installer is licensed and has a good track record. A reputable and vetted installer will have a strong commitment to customer satisfaction and be able to guarantee the quality of their work.
Cost of insurance
A ghost immobiliser stops thieves from starting up your vehicle. It connects to the car's CAN data network and generating a unique PIN code sequence that needs to be entered prior to the engine can start. It can be easily transferred between vehicles, and it does not require power cables or batteries. It can be used in conjunction with the traditional car alarm system or as an alternative. It is also easily programmed to work with a brand new vehicle if you're thinking of selling or trading your vehicle in the future.
The autowatch ghost is a secluded immobiliser that is easy to install and cannot be discovered by thieves. It uses the buttons on your car to enter your PIN code. This makes it difficult for thieves discover its presence. It is also extremely weatherproof and durable, which means it can withstand all types of environmental conditions. It is ideal for classics, sports cars and luxury vehicles that require battery isolation when in storage for a long period of time.
This cutting-edge technology stops the cloning of signals and bypassing door locks by connecting directly to the CAN. It is a TASSA certified immobiliser that is recognized by insurance companies as a powerful deterrent to theft. It also comes with a unique feature, Stealth Active. This is not detectable by key cloning devices.
Unlike other car immobilisers, the Autowatch ghost is a low-maintenance device which does not require wiring, which means it doesn't interfere with your car's electrical system, or the aesthetics of your. The installation process is easy and can be performed by a skilled technician. It is important to remember that the device can be damaged if installed improperly. It's important to hire an expert to install the device in order to protect your vehicle.
Although many people choose to install a ghost ignition system themselves however, it's essential to seek help from a professional in the event you're thinking about this option. Doing it yourself could result in a variety of problems, such as connecting the wrong wires and causing electrical faults. A wrong placement could render the device ineffective, or even visible to thieves. For this reason, it's recommended to incorporate an immobiliser in conjunction with other security measures such as GPS tracking and alarm systems. This will give you the best chance of obtaining lower insurance costs.